Tag: scrap quilts

Categories
Build a block quilting scraps sewing

Build a Block: Bow Tie

Happy New Year!

Welcome to the New Year: 2024! Here is my first build a block for the year. I am keeping it simple for starters! This block goes together quickly. It wins the race for fastest block in this series so far. Watch the short assembly video here on YouTube. There is a chart at the end if you would like to make this block in other sizes.

My favorite block size seems to be 4 1/2″ at the moment. That is the finished size of the block below. It is made from four 2 1/2″ squares (two bow tie color and two background) and two 1 1/2″ squares for the corners. Notice that I folded the triangles and pinned them to take the picture for this layout.

I finger pressed the small squares so I had a sewing line. I also have tape on my machine so I do not have to mark squares under 2 1/2″ when sewing on the diagonal. I am lazy and am willing to freely admit it!

These two blocks are exactly the same. They would be easy to speed piece for a larger quilt.

Since the small squares are sewn to a background piece, it is ideal to press towards the small triangle.

Never hurts to double check, right? We are almost done! Told you this would be quick!

Sew the pieces together in pairs. They are both the same!

This block naturally wants to be pressed to the tie colored square. The seams will lock together in the next step when pressed this way.

Tah-done! I show this in the 4 1/2″ and 6 1/2″ because I had to make sure the proportions were right for the parts chart at the end of this post.

If you have been watching my YouTube channel, I will show you my husband’s bow tie quilt in the Blabfest Friday video that will be live on January 5th, 2024. It is his “car quilt”. I think every vehicle needs its own quilt…just like it needs a flashlight and a toolbox.

I hope you are using up those scraps to make these easy blocks. Soon, I will have to start assembling yet another sampler scrap quilt from the pile I am accumulating! What do you do with your test blocks? I love hearing from you in the comments! Thank you for stopping by!

Later,

Lorrie

Categories
Build a block quilting scraps sewing

Build a Block: Roman Tile

This block is just a few seams above cutting out a plain square! How is that for simple construction? I wish I had grabbed some brighter colored scraps for this block, but this was in my hand waiting to be used up!

You can view the short video here of the block construction. It shows both of the ways to create this block. The first one pictured has two fewer pieces. Neither one is difficult.

I will add the variety of sizes chart at the very end of the post…after my sign off and final comments, if you are interested. This should be a printable image.

This example shows a 2 1/2″ x 4 1/2″ center. The top and bottom rows are made from two 1 1/2″ x 2 1/2″ pieces and four 1 1/2″ cornerstones. The block finishes at 4 1/2″ inches.

Sew the cornerstone squares to the rectangles on both sides. Use a 1/4″ seam.

Press to the outside.

I always like to check my layout at this point, especially when I am speed piecing…just to make sure I haven’t lost any of those important pieces.

Sew on the top and bottom rows. Press to the outside. Tah-done!

Example #2: Same block, just a little scrappier!

This example shows a 2 1/2″ square center. The top and bottom rows are made from two 1 1/2″ x 2 1/2″ pieces and four 1 1/2″ cornerstones. The side pieces are two 1 1/2″ x 2 1/2″ pieces that match the center square. The block finishes at 4 1/2″ inches.

Make a center unit. (This matches the center in the first example when you are finished sewing the pieces together.) Press this unit towards the inside…towards the block.

Assemble the top and bottom rows by sewing the cornerstones to the rectangles.

Press to the outside like pictured below.

Add the top and bottom rows to your center unit. Seams should nest together to make construction easier.

Tah-done! Press to the outside.

These blocks are quick and easy to construct. This would make a great leader/ ender project. I envision it with bright colored scraps for the center and a variety of backgrounds for the cornerstones set together with NO sashing. What a great scrap quilt that would be!

I can’t wait to make an entire quilt with these blocks! It would make a great donation or kid quilt! Would you make a quilt with these? Let me know in the comments! (about this quilt…not interested in Russian viagra or manifestos!)

Later,

Lorrie

Categories
Build a block quilting scraps sewing

Build a Block: Square Surrounded & Again

This lovely block uses up lots of little scrap blocks. It is easily adaptable to larger sizes, too. It would be a fantastic leader/ ender project. As it is shown, it finishes at 6 1/2″.

The center square is 2 1/2″. The surrounding rounds are made from 12- 1 1/2″ inner ring blocks and 20- 1 1/2″ outer ring blocks. I used pink and blue to make it easier to see the block rounds. This would be a great block made up in all scraps or other high contrasting rounds. My YouTube speedy Build a Block video can be found here.

I start by moving the outer round of blocks to the side. I can only focus on one task at a time these days.

If you were doing this as all scrappy you could easily sew all the blocks in sets of two and then make the necessary 4-4 block units and 2-6 block units without worrying about placement.

Sew blocks that touch the center into 4 pair units. Two of these units will be sewn to the center soon.

Add the corner blocks to two of those pair units to make 2- four block units.

To reduce bulk, press seams open.

Sew both pair units to the center square.

To reduce bulk, press open…or however you wish to press. No quilt police here!

Add the 4 block units to the new central unit.

To reduce bulk, press seams open.

Sew all of the outer blocks in pairs, then sew pairs together until you have 2- 4 square units and 2- 6 square units.

Press open to reduce bulk. (You knew I was going to say that, but that doesn’t make you a psychic!)

I always like to lay out the block at every step, just to make sure I have placement the way I intended it to be when I started. I am fairly quick with the seam ripper these days, but I still don’t enjoy that process.

Add both of the 4 block units to the sides of the center unit.

You know what I am going to say! Press seams open to reduce bulk.

Add the 6 block units to the last two sides of the center unit.

Not saying…you know!

Tah-done! Another beautiful scrap block! This one used up LOTS of little pieces.

I hope that you are enjoying this Build a Block series of simple blocks. I am starting to have a nice little pile of these blocks just by creating ones to picture in these tutorials. I hope you are, too.

Thank you for stopping in to look at my pictures and read my block making narrative. What are you creating today? I hope it is simple and relaxing! I would love to see pictures of your work over on my Facebook page. Come join my group!

Later,

Lorrie

Categories
Build a block quilting scraps sewing

Werquilters Build a Block: Square Surrounded

This post is related to the YouTube short that shows a sped up version of the assembly of this block. See the YouTube video here. This block makes a great leader/ender project to use when assembling another project.

This block is made with 1 1/2 and 2 1/2 inch squares. It could easily be made from other sizes. Block construction is simple.

Using your smaller squares, make 4 sets of 2 squares.

Press open…or however you desire.

Join 2 of these sets to your center square on opposite sides.

Press towards the larger center block.

Add blocks to the ends of the 2 sets of 2 squares as pictured below. Then press seams open.

Add blocks to the center unit on both sides.

Press seams open or however you wish.

Ta-Dah! One little scrappy block!

I hope that you are enjoying this series of Build A Block! I am having great fun using up those scrapps while I share with you! I would love to see what you are up to today!

Later,

Lorrie

Categories
Build a block quilting scraps

Werquilters: Build a Block 9 patch turned 4 patch

It is time to use up some more of those scraps! Let’s make another basic block…9 patches added to larger squares to create a 4 patch. These blocks are versatile. When set together, they make an adorable scrap quilt. See my YouTube short showing this same block. It is part of my series on using up bonus half-square triangle blocks.

Here is a block waiting to be sewn. You will need the following pieces to make this 6 1/2″ block:

  • 2- 3 1/2 inch squares
  • 18- 1 1/2 inch squares to make both nine patch blocks

This block could easily be made in a variety of sizes: 12 1/2″, 18 1/2″, etc.

Start by speed piecing the rows of the nine patches.

Press the seams open…if you wish.

Sometimes I use my fingers to gently pull on the block so I can get the seam open to press it. Without burning my fingers, of course.

Look at those nice, little rows. Sew the rows together.

I press these seams open, too. It cuts down on the bulk and the blocks lay flatter.

Occasionally, I have difficulty getting those seams open. I have a stylus…actually it is a dental tool from the hardware department of a flea market…that helps me grab the seam.

You can see my stylus a little better here in this picture.

After the 9 patches are ready, sew the bigger blocks to them. Press towards the larger block.

When you turn the block pieces around, the seams will nestle.

Press the seam whichever direction you so desire…or open if you want.

Tah-done! What a cute little scrappy block!

What blocks have you been making to use up your scraps? Please comment below. I can’t wait to hear from you!

Later,

Lorrie

Categories
Build a block quilting scraps

Werquilters: Build a Block Scrappy Star

This week, I am adding a second block, the scrappy star. It is pictured here as a 4 1/2″ block. It could easily be made into a 8 1/2″, 12 1/2″ or 16 1/2″ block.

This tutorial reads like a picture book. I learned how to edit photos! Many of the directions are right in the picture. This also matches my YouTube short that shows how to use up some of those bonus triangles we all have. Most of the pictures are the same as those in the video, too.

Here is the finished star:

I have been making these as leader/ ender blocks for the entire summer. I have a nice little pile going.

The first image is parts you need if you don’t cut triangles to make this block. The directions are in the pictures below to make the triangles from squares. Just look for the tan and yellow squares.

This second picture, with the lavendar background, is the number of pieces that you need if you ARE cutting the triangles. I use an accuquilt die to cut those little triangles, but it is not necessary to have one of those to cut pieces.

The easiest way to make any block, is to lay out the pieces before you start.

The first sewing step is to make the 8 half square triangles, whether you are using triangles or squares.

The images with brown fabric are constructed from squares.

I love the washi 1/4″ tape. It doesn’t leave a residue. It stays on for a long time. There is a lot of it on a roll.

Now that your star points are sewn, it is time to press.

Background fabric should be towards the inside. Star points should be on the outside.

Sew the star point pieces together in pairs.

I prefer to press these seams open to reduce bulk. You can press the seams to the side if you prefer. I know this is a controversial topic in the quilting world. No judgements here!

Lay your pieces out again. This is a double check of your star points, etc.

You have the parts assembled for all 3 rows.

Time to finish the block. Sew the rows together.

Again this is to reduce bulk in these little seams.

Here it is again…the cute, scrappy star block.

I hope you are enjoying making little scrap blocks. There are many more blocks to come!

What is your favorite scrap block to make?

Later,

Lorrie

Categories
quilting tranquility

Scraptastic Quilt

Recently I started watching Pat Sloan on her YouTube channel every morning. It is a nice relaxing way to start my day. I participated in the Snapdragon quilt along. Well, I made the blocks anyway. They are currently on my design wall.

Snapdragon quilt blocks

Finishing the top is a job for next week…or maybe a little later in the month.

What do you have on your design wall? What project are you working on next?

Later,

Lorrie

Categories
quilting scraps Uncategorized

Continuing a Sampler Spree Quilt again…5th time is almost a charm

I am still working on the 100 blocks from the Sampler Spree book. Only 18 more blocks to go!

Here are the 35 blocks that I created during the month of October. I was incredibly productive. We were at the cabin in Michigan on Long Lake. I made most of these blocks while my DH watched football. I am loving retirement!

Here is my tracking sheet. There are fewer and fewer plain white numbers left that have not been made. I am a little late getting started on November blocks…only one so far.

I had a serious brain glitch when I put this block together. The picture on the right is the correct assembly for the Buoy block. I incorrectly 1) added the corners and 2) assembled the block on the left. I think it looks like a butterfly or a beacon. I am embracing my stupidity and counting it as a bonus block!

I REALLY like the shape of this block. I think I will translate it into a larger size and make another scrap quilt. I am drawn to weathervane and quatrefoil shapes.

I also like these blocks. Who knows…maybe they will show up in some future scrap quilts, too.

This one has that four pointed shape that I am drawn to, but it doesn’t actually have the points. It was not an accident…they are not part of the block. This block would be fantastic for a fussy cut center.

Time to get back to making on this blustery last day of November! I have enjoyed making these blocks, but I am ready to be finished!

What are you making today?

Later,

Lorrie

If you would like to review the first installments, here are some links to follow:

  1. It starts!
  2. Second installment
  3. Third installment
  4. Fourth installment

Categories
quilting scraps

Continuing a Sampler Spree Quilt again and again

Here is the fourth installment of Splendid Quilt sampler blocks! This time I started with off-white solid scraps and a small piece of tan with taupe print. These were squares and chunks…not worth measuring.

Here is my tracking sheet. I got 10 blocks out of the background pieces. There may be more coming, but there were only 10 blocks that had a background and 1 other color of fabric. These block numbers are highlighted in blue. Please be tolerant of my sideways picture. I could not get it to load with the correct orientation! Aarrrgh!

Here are the 10 blocks. Some of these had 1″x 1″ pieces! That is a challenge, even for me…the lover of small pieces of fabric!


I did add a piece of black to the lightening bolt block. I wanted to use up that piece of purple paisley swirl, but did not have quite enough. I like the way it turned out with the extra color added.

I am to 48 out of 100 blocks! That is 48 percent of the blocks are made. Time to go plan which blocks to make next!

What are you planning to do today? (Nothing too devious, I hope!) Have a great day!

Later,

Lorrie

Categories
quilting scraps

Continuing a Sampler Spree Quilt again

This batch of Sampler Spree blocks has an off-white background with a tan rose outline on it. It was a quarter yard piece width of fabric, plus a chunk that was 9″ x 12″.

I made 13 blocks using this background and scraps. Here is my graphic list.

I started with this olive green calico as the scrap.

Then I switched over to purple sparkling princess fabric.

I finished with green batik.

Here are the scraps that were left to add to my bin.

That is my eye candy for this week. Hope it inspires you to work on a project that you love.

What are you making today?

Later,

Lorrie